Magnet sizing & vehicle planning
A car magnet size guide should begin with your vehicle, not a standard recommendation for every car or truck. Two similar-looking doors can have different usable areas because of handles, trim, curves, and body lines.
Measure the exact place you plan to use, then compare the formats available in business magnets. This process helps you choose a sign that fits the panel and leaves enough design space for your business name, service, and main contact detail.
Check the surface before measuring
First confirm that the intended panel provides magnetic attraction. Some vehicle panels and bumper covers use aluminum, plastic, or other materials that will not hold a magnetic sign. Check each proposed position separately, even on the same vehicle.
A suitable material is only part of the decision. Look for a smooth, flat area in sound condition. Exclude ridges, deep curves, handles, trim, dents, and rust from your measurements. Do not plan to bridge a door gap or let part of the magnet float above the surface.
Record the usable panel area
Park the vehicle and measure the clear area in both directions. Make a note for the driver side and passenger side rather than assuming they match. Photograph the area for your own planning and mark the features that limit the sign.
Record the usable rectangle separately from the overall door dimensions. A wide door with a raised molding may offer less useful space than its outside measurements suggest. The goal is complete contact across the finished sign, not simply fitting inside the outline of the door.
Compare current size labels without assuming orientation
MOTC lists several rectangular and square business magnet formats. The examples below are a starting point for comparing artwork proportions. Confirm how width and height are represented in the product designer for your selected option.
| Size label | Layout to explore | Fit question |
|---|---|---|
| 6 × 18 inches | A short horizontal message | Can the entire narrow rectangle sit flat? |
| 9 × 12 inches | A compact brand and contact layout | Is the message clear at the smaller scale? |
| 12 × 18 inches | A logo with a service line | Does the selected orientation avoid trim? |
| 12 × 24 inches | A wider arrangement | Is the full area flat rather than curved? |
| 18 × 24 inches | A larger panel layout | Does it fit this specific vehicle? |
Scroll sideways on small screens. Check current availability and the selected template before ordering.
Try a paper outline on the parked vehicle
Cut a plain paper rectangle to the dimensions you are considering and hold it against the intended location. This is a fit exercise, not an installation method. Keep the vehicle stationary and check where the outline meets curves, handles, and edges.
Repeat on the other side. If the outline crosses an unsuitable feature, compare a different format. Do not treat a close fit as proof that the finished magnetic material will conform to a shaped panel.
Fit the message to the chosen format
Arrange the business name or recognizable logo first, followed by a short description of the service and a useful contact detail. A sign with more area does not need more wording. Additional space can simply make the important elements larger and easier to distinguish.
Review a small preview and, where practical, a paper layout at actual size. If a long service list forces everything into tiny lettering, shorten the list. Change the wording before using a size that exceeds the vehicle’s suitable area.
Confirm the order and plan for care
Compare the approved design with the selected dimensions and material option. Keep a record of which size belongs on each panel, especially if you are ordering for more than one vehicle. Another model in the fleet may require a separate layout.
Read MOTC’s car magnet care guidance before installation. Size selection does not replace the need for clean surfaces, full contact, regular inspection, and suitable storage between uses.
Final checklist
- Test the exact panel for magnetic attraction.
- Measure the clear flat area on each side.
- Confirm the template’s width, height, and orientation.
- Check a paper outline while the vehicle is parked.
- Review the message at the selected size.
- Save the approved size and vehicle assignment.
Frequently asked questions
What is the best car magnet size?
There is no single best size for every vehicle. Choose a format that fits the complete flat magnetic area and gives your essential message enough room.
Can I use one size on all my work vehicles?
Only if it fits each intended panel. Measure different vehicle models and both sides before creating a fleet order.
Should I choose the largest magnet available?
Choose the largest useful layout that actually suits the surface, rather than the largest listed option. A well-organized smaller design may fit your vehicle more effectively.